No two parking lots are exactly alike, but there are a few common features that you can expect to see. Asphalt striping contractors use certain standard dimensions for parking spaces and aisles in lots throughout Georgia. Although contractors must also take into consideration federal and state laws along with local codes and ordinances, knowing how and why they choose specific dimensions helps you feel more confident about moving forward with your parking lot striping in Marietta project.
What Are the Standard Dimensions for Striping in Marietta, GA?
The most common standard dimension for Marietta lot striping is 9 by 18 feet as measured by the face of the curb for general parking spaces. This provides enough space for the average standard vehicle to maneuver into the space and while also leaving room for the driver and passenger to safely open the doors and exit the vehicle.
Many parking lots also include compact spaces in their parking lot line striping design. These are usually only slightly smaller, with most measuring around 8.5 feet by 16.5 feet. Keep in mind that there are often variations to the sizes. A parking lot striping contractor will also consider the angle of the spaces before creating the final dimensions.
How Does the Traffic Flow Impact the Design Plan?
A parking lot may have straight-in parking stalls with 90-degree angles, or the spaces could be created at 45 or 60-degree angles. For straight parking spaces, the striping contractors might choose to make the adjoining aisles 22 feet wide. Angled parking spaces make it easier for drivers to back out of, which is why those aisles are usually around 16 feet wide.
Striping contractors also consider whether an aisle supports one or two-way traffic. Even with angled parking, they may choose to make the aisles bigger to support the two lanes of cars. Aisles designed for one-way traffic can be thinner, which helps to increase how many stalls you can fit in a lot.
How Do You Plan for Accessible Spaces When Striping In Marietta?
One of the most important parts of a parking lot design plan is the areas that are designated for accessible spaces. In Marietta, a parking lot striping company will help to ensure that you have the correct number of spaces in the best place to create an accessible route to the nearby facility.
Accessible parking spaces must be 96 inches wide with a 60-inch access aisle to meet ADA compliance guidelines. Vans need larger spaces, and you’ll need to make sure that all accessible spaces are marked accordingly.
Choose a Local Company for Your Marietta Parking Lot Design
MH Greeson Paving is knowledgeable of the laws and regulations that we’re required to follow for parking lot striping, pavement markings and ADA compliance in Marietta and the surrounding areas. Our team also follows strict protocols for completing asphalt paving, crack repair and sealcoating projects. Once we’ve striped the perfect parking lot design for your property, we can also add bollards, traffic signs and car stops to further increase safety. To get started on your striping project, call our team at 770-335-2983, email us at tripp@mhgreesonpaving.com or send in our online information request form to get a free quote.
